The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
Hardy C2® Certified Cable has been designed specifically for the electrically and mechanically harsh environments found in Process Weighing applications. While many process variables are transmitted at a 0-10 volt or 4-20 milliamp level, signals from load or force sensors are typically one thousand times smaller, or 0-0.010 volts. NOTE: To add C2 Cable to a quote, add 1 C2 cable to the quote cart and then specify the number of feet required under Application Notes.
The Hardy E-Scale Bench scale series is the world's first IIoT-ready (Industrial Internet of Things) scale base. It includes an integrated Hardy weight processor for direct network connection for EtherNet/IP® networks. Depending on configuration, the E-Scale offers complete flexibility in size and capacity for use in a wide range of weighing applications. E-Scales eliminate possible failure points and save the cost of extra splice-boxes and other components.
The Hardy HI 1734-WS Point I/O Series Weight Processing Module is a plug-in module for Rockwell’s Point I/O chassis, the fastest growing segment of Rockwell controllers. Designed exclusively for weight processing in POINT I/O products such as communication interface modules and terminal bases from Rockwell Automation, the HI 1734-WS enhances the productivity of manufacturing systems by digitally suppressing noise and dramatically reducing scale settling time.
Hardy’s single (HI 1756-WS) and dual (HI-1756-2WS) are weigh scale modules that mount directly into an Allen-Bradley ControlLogix® PLC Chassis. They read weight and diagnostic data from one set or two separate sets of strain gauge load sensors or load cells and communicate this data over the I/O chassis backplane to the ControlLogix Processor.
The HI 1756-nDF ControlLogix Dispenser/Filler module is the easy answer to a variety of material feed applications, especially, when speed and accuracy of the feed are paramount to the process. The module batches, fills, or dispenses aggregates, granulates, liquids, or gases, handling the entire feed process.
Used in new applications or to retrofit volumetric feeders, the HI 1756-FC feeder control module mounts directly into your ControlLogix® chassis and controls many standard feeding devices as well as your proprietary designs.
Hardy HI 1769-WS and -2WS are single channel PLC-style weigh scale modules for use with the Allen-Bradley MicroLogix® 1500 and CompactLogix® controllers. The HI 1769-WS and -2WS reads and conditions weight and diagnostic data from strain gauge load sensors or load cells up to one hundred times per second and communicates this data over the I/O chassis backplane to the PLC processor.
The HI 1769-FC Feeder Control PLC module automatically calculates and adjusts tuning parameters typically required to maintain desired flow rates in a dispensing or filling system. It is a microprocessor-based CompactLogix™ and MicroLogix™ 1500 plug-in module used with the PLCs Rack I/O in a variety of material-flow applications, such as auger, belt, and vibration-based feeders. It can be operated in batch, automatic, or manual mode.
Hardy Process Solutions EASY 8™ Weigh Scale Module (HI 2080WS) is for the Allen-Bradley® Micro800™ programmable controller. This low-cost solution is designed to provide “just enough“ functionality that strikes a balance between price, quality of weight reading, and Hardy’s reputation for high-quality process measurement products.
The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities
The HI 3030 is a flexible weight controller that can monitor and control up to four scales simultaneously. It can act as a front end to a PLC/PAC, PC, or DCS system or operate as a stand-alone instrument for simple control or weight monitoring. Common applications for the HI 3030 include leveling, batching, filling, dispensing, and check weighing. You can easily configure or monitor the HI 3030 operations using the front panel, a web browser, or network interface.
