The HI 3010 is a self-contained application-specific process weighing controller that can act as a stand-alone controller, or as a sub routine in your PLC/PAC, PC, or DCS ladder logic system over its extensive networking capabilities
Whether filling or dispensing solids, liquid, or gases, the Hardy Filler/Dispenser automates your entire process. The HI 3010 achieves accurate and repeatable results, not only through the use of our core weight control technologies, but also because it controls, monitors, and tunes the entire filling or dispensing operation.
As a stand-alone controller, it offers fast and slow speeds with auto self-adjusting preacts for fast precise process control. Built-in totalizers keep you up to date as to the number of cycles and amount of material in the cycle, as well as history totals for each of the twelve internally stored material configurations.
Output alarms warn you of overfills, feed timeouts, out of tolerance, not OK to fill, too many jogs, if the discharge gate is not responding, and even when to change an intermediate bulk container.
The HI 3010 Filler/Dispenser controller is field configurable for the following applications:
- Intermediate bulk container
Visit our case studies or application notes on industrial weighing to learn more. Hardy’s process weighing solutions are easy to install, configure, commission, and operate. They are easy to maintain and save you time, money, raw materials, and/or finished product.
- 4 line x 20 character backlit LCD
- 5 x 7 dot matrix
- 55 times per second
- Sliding up to 250 readings in single unit increments
- Display: 1:985,000 (3mV/V load cells)
- Internal: 1:1,048,000
- Ethernet: TCP/IP; embedded web server
- Serial RS 232: simplex to printer
Stable Weight Reading
- WAVERSAVER® 0.25Hz minimum
- C2® electronic calibration
- Traditional calibration with test weights
Instrument Local I/O
- Five mappable inputs optically isolated
- Four or seven mappable outputs 48-240VAC Form A
- Third-party mappable over DeviceNet
Load Point Excitation
- 5VDC power drives up to 16 350-ohm load cells
- 108-264VAC, 47-63Hz, or 12-24 VDC
- 25 watts max
- -10° to +50°C (14° to 122°F)
- -20° to +70°C (-4° to 158°F)
- Panel mount
- Swivel mount
- Panel mount: 6.03" (153mm) with rear cap
- Panel cutout: 8.94" W x 6.63" H (227mm W x 169mm H)
- Two-year warranty against defects in workmanship
All specifications are subject to change without notice.
The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.
The HI 3010 features the following Toolbox technologies:
WAVERSAVER® vibration eliminator
Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading.
C2® (or eCAL) Electronic Calibration
The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.
INTEGRATED TECHNICIAN® Operator Diagnostics
Hardy's INTEGRATED TECHNICIAN (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC. These tests display system weights, voltages, and pass/fail displays to help isolate a problem to the instrument, cabling, or sensors, helping to reduce maintenance costs.
Embedded Web Server
Access your instrument from any computer browser, easing setup and making diagnostics fast and easy. Use the Embedded Web Server to set up all parameters from anywhere on the Ethernet network.
Secure Memory Module Stores Configuration Data
Hardy's Secure Memory Module (SMM) uses a standard SD card to automatically back up critical weighing system data, allowing you to transfer it to another like controller in a few minutes.
FEED-MASTER is a set of software controls designed to control volumetric and gravimetric feeders.