ANY-WEIGH® Bench scales
The ANY-WEIGH® Bench scales provide complete flexibility in size and capacity for use in a wide range of weighing applications. With their rugged construction and stainless steel tops, ANYWEIGH Scales are a great fit for both laboratory and industrial installations.
The ANY-WEIGH line of bench scales can be configured with standard interfacing to a weight instrument or with a built-in, direct connection to a PLC or PC.
Universal Scale - HI xxxxSBU-x*
Directly attach the scale’s 15-foot cable to any weighing instrument or controller. If interfacing with a Hardy Controller, you can take full advantage of WAVERSAVER®, and C2® Electronic Calibration.
DeviceNet Scale - HI xxxxSBD-x*
With its built-in DeviceNet interface you can use this scale to provide a weight output to any point on a DeviceNet Network. This version also incorporates both the WAVERSAVER and C2 technologies, and comes with a six-inch pig-tailed connector.
Analog Scale - HI xxxxSBA-x*
Use the Analog Output Scale to provide a 4-20 mA output directly proportional to the weight reading. This version offers a low-cost, effective solution for bringing an analog weight reading directly into a control system, with minimal additional wiring or hardware, and comes with a 15-foot 2-wire shielded cable. The scale comes pre-wired and pre-calibrated from the factory but provides potentiometers for coarse and fine zero adjustment as well as span. It does not have C2 or WAVERSAVER capabilities.
Universal Scale Specifications
0.030 % R.O.
5.0 % R.O.
Creep @ 30 Min.
0.030 % R.O.
Temp Effect Output
<±0.0015 % R.O./°F
Temp Effect Sensitivity
<±0.0008 % R.O./°F
Comp. Temp Range
-10 - +40°C
Oper. Temp Range
-10 - +65°C
297.5 ± 10% ohm
250 ± 5% ohm
5 - 15 Volts
Safe Load Limit
300 % Emax
400 % Emax
Max Cornering Error
0.06% 1/2 full scale load, 1/2 way to corner
Specifications subject to change without notice.
ANY-WEIGH Bench Scales are available in two standard sizes with multiple capacities. They range in height from 1.54in (39.1mm) to 2.05in (52.1mm).
Scale size: 12 inch by 12 inch (298mm by 298mm)
Scale capacities: 33, 66, 130 lbs (15, 30, 60 kg)
Scale size: 24 inch by 24 inch (600mm x 600mm)
Scale capacities: 130, 330, 660, 1,300 lbs (60, 150, 300, 590 kg)