New Swivel Mount Enclosure
Turns an HI 6500 Series Weight Processor Into a Digital Weight Indicator
Hardy is now shipping a new Digital Weight Indicator in a Swivel Mount Enclosure designed for harsh and heavy wash down environments. The robust design is made to withstand the most demanding industrial installations. Made in the USA using 16 gauge 304 Stainless Steel, the enclosure is rated for IP66/NEMA 4X environmental conditions and is delivered containing the Hardy HI 6500 series weight processor.
The large, high-contrast LCD display that makes the Digital Weight Indicator easy to view and simple to use is protected from impact by a thick polycarbonate window behind a water-tight membrane. The tactile button cluster eliminates accidental triggering caused by wipe-down sanitizing and harsh water-jet cleaning. This Digital Weight Indicator has a Class I, II, III, Div 2 rating for hazardous areas.
Easy Installation
Featuring an extra-large base, Hardy’s Swivel Mount Enclosure can be permanently mounted on both vertical and horizontal surfaces or simply left free-standing on a table top. The swivel mount base ships with just 4 mounting holes that match Hardy’s bench and floor pedestals, leaving plenty of solid surface area to drill a custom hole-pattern that suits your specific installation requirements.
Simple Set-Up and Calibration
The SME comes with Hardy’s new Set-Up WIZARD to guide users step-by-step through instrument set-up and calibration. Use Hardy’s C2 enabled sensors for automatic system calibration and scale verification, saving hours in commissioning and routine maintenance. The high-definition LCD display with a 140 degree viewing angle makes instrument use easier than ever with Help Text available at the press of a button. Use the Hardy’s embedded Webserver to remotely monitor, diagnose, or control your instrument from anywhere on your network.
Note: For Firmware, User Guides, and other Weight Processor Specific items, please see the respective Docs & Programs Page for each product family.
Enclosure:
• IP66/NEMA 4X tested
• 16 gauge 304 Stainless Steel
• Bisco HT-800 Gasket
• NEMA 4X Nylon Cable Gland
Power:
• 24 VDC / 7 watts max with two IT junction boxes and 8 load points
• 120-240 VAC / maximum 8.25 Watts (optional)
Temperature:
• -10°C to +60°C (14° F to 160°F)
Humidity:
• 0-90% non-condensing
Dimensions:
• 7” W x 6”H x 5” D (23.5 cm x 15.2 cm x 12.7 cm)
Cable Grip Range:
• 0.17” to 0.45” diameter (0.4 cm to 1.1 cm)
Weight Processing:
• WAVERSAVER®: .25 Hz to 7.5 Hz
• Averaging:1 to 255 User-selectable in single increments
Keypad:
• 5-Button Tactile
Certifications:
• Hazardous: Class I, II.III/Div2 (Pending)
• Safety: UL, CUL and CE (Pending)
• EtherNet/IP ODVA Certification Level 3
Warranty:
• Two-year warranty against defects in workmanship
Instruments:
HI 6500
• 110 updates per second
• 1:10,000 divisions of full scale
• Maximum displayed resolution: 1:999,999
• Internal resolution 1:8,388,608
• 5 VDC Excitation
• Up to eight 350Ω Sensors
• Modbus RTU, Modbus TCP/IP
• Ethernet TCP/IP, EtherNet/IP
• Profibus-DP (-PB models only)
• Analog 4-20mA (optional)
• RoHS3 and REACH
(See HI 6500 Weight Processor for further detail)
HI 6500-EIP Series Standard Config with EtherNet/IP
HI 6500-WP-10-EIP-SM-DC: Swivel Mount Enclosure, 24 VDC Power input
HI 6500-WP-10-EIP-SM-AC: Swivel Mount Enclosure, 120/240 VAC Power input
HI 6500-PB Series Standard Config with Profibus-DP
HI 6500-WP-10-PB-SM-DC: Swivel Mount Enclosure, 24 VDC Power input
HI 6500-WP-10-PB-SM-AC: Swivel Mount Enclosure, 120/240 VAC Power input
HI 6510-EIP Series Analog Config with 4-20ma, EtherNet/IP
HI 6510-WP-10-EIP-SM-DC: Swivel Mount Enclosure, 24 VDC Power input
HI 6510-WP-10-EIP-SM-AC: Swivel Mount Enclosure, 120/240 VAC Power input
HI 6510-PB Series Analog Config with 4-20ma, Profibus-DP
HI 6510-WP-10-PB-SM-DC: Swivel Mount Enclosure, 24 VDC Power input
HI 6510-WP-10-PB-SM-AC: Swivel Mount Enclosure, 120/240 VAC Power input
