The ANY-WEIGH® Bench scales provide complete flexibility in size and capacity for use in a wide range of weighing applications. With their rugged construction and stainless steel tops, ANYWEIGH Scales are a great fit for both laboratory and industrial installations.
The ANY-WEIGH line of bench scales can be configured with standard interfacing to a weight instrument or with a built-in, direct connection to a PLC or PC.
Universal Scale - HI xxxxSBU-x*
Directly attach the scale’s 15-foot cable to any weighing instrument or controller. If interfacing with a Hardy Controller, you can take full advantage of WAVERSAVER® and C2® Electronic Calibration.
DeviceNet Scale - HI xxxxSBD-x*
With its built-in DeviceNet interface, you can use this scale to provide a weight output to any point on a DeviceNet Network. This version also incorporates both the WAVERSAVER and C2 technologies and comes with a six-inch pig-tailed connector.
Analog Scale - HI xxxxSBA-x*
Use the Analog Output Scale to provide a 4-20 mA output directly proportional to the weight reading. This version offers a low-cost, effective solution for bringing an analog weight reading directly into a control system, with minimal additional wiring or hardware, and comes with a 15-foot 2-wire shielded cable. The scale comes pre-wired and pre-calibrated from the factory but provides potentiometers for coarse and fine zero adjustment as well as span. It does not have C2 or WAVERSAVER capabilities.
Rated Output
- (ES) 0.900±0.0009mV/V
Combined Error
- 0.030 % R.O.
Zero Balance
- 5.0 % R.O.
Creep @ 30 Min.
- 0.030 % R.O.
Temp Effect Output
- <±0.0015 % R.O./°F
Temp Effect Sensitivity
- <±0.0008 % R.O./°F
Comp. Temp Range
- -10 - +40°C
Oper. Temp Range
- -10 - +65°C
Input Resistance
- 297.5 ± 10% ohm
Output Resistance
- 250 ± 5% ohm
Excitation
- 5 - 15 Volts
Safe Load Limit
- 300 % Emax
Ultimate Load
- 400 % Emax
Max Cornering Error
- 0.06% 1/2 full scale load, 1/2 way to corner
Warranty
- Two years
Specifications are subject to change without notice.
The Hardy Process Toolbox is a set of productivity tools that support industrial weighing functions. Each tool saves time, increases accuracy, improves efficiency, or reduces risk in process weighing applications, including WAVERSAVER® to eliminate vibration, C2® electronic calibration, and Integrated Technician® to name just a few.
The ANY-WEIGH Bench Scales feature the following Toolbox technologies:
WAVERSAVER® Vibration Eliminator
Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading.
C2® (or eCAL) Electronic Calibration
The Hardy C2® (or eCAL as it is known in China) core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights.
