HI 200DNWM DeviceNet Weigh Module
Certified DeviceNet Compliant
Hardy's HI 200DNWM is the first general purpose weigh module designed specifically to the DeviceNet open network standard, and the first to pass conformance testing at one of ODVA's independent laboratories. This instrument provides power for up to four, 350 ohm, standard strain gauge load cells, load sensors and load points.
Notice for Non RoHS Compliant Construction
The HI 200DNWM receives and digitizes the weight signal and transmits Gross, Net and Tare weight data over the DeviceNet open network interface to other devices. Two independent TTL level outputs provide setpoint capability with separate deadbands and preacts for use in applications such as batching, blending, filling, dispensing, level and check weighing. It responds to both Command Interface (discrete) and Explicit (block) messages.
When the HI 200DNWM is used with C2® certified load cells, THE BUTTON allows the system to be automatically set up, calibrated and on line in a matter of seconds, reducing the system start up time and costs. Hardy's exclusive WAVERSAVER® feature eliminates the effects of plant and process vibration.
This instrument was the first DeviceNet weighing module to be referenced by Rockwell Automation's Encompass program. Contact us today to integrate weighing into your DeviceNet application!
• Provided from the backplane of the rack: +5Vdc
• < 0.5 Amps @ 5Vdc
• Signal, -0.3mV through +15.3 mV
• Sense, +5Vdc
• C2® Electronic Calibration Diagnostics data
• Excitation 5Vdc
Common Mode Rejection
• 100dB at or below 60 Hz (minimum)
• Internal, 1:8,388,608
Vibration Frequency Rejection
• 0.25 Hz and above in 5 selectable steps
• 0.6 lb (0.27 kg)
• Operating Temperature: 0 to 60°C(32 to 140°F)
• Storage Temperature: -40 to 65°C(-40 to 185°F)
• 5 to 95% (non-condensing)
• Net, Gross, Rate-of-change
• Electronic (C2)
• Traditional (test weights)
• Up to 100 updates per second
• “OK” Module Status, bi-color LED
• “Scale 1” Functional Data, bi-color LED
• “Scale 2” Functional Data, bi-color LED
• Two-year warranty against defects in workmanship
Specifications Subject to change without notice.
Options can be ordered at the same time the module is ordered by adding the dash designators to the end of the module number.
HI 200DNWM DeviceNet Weigh Module standoff mounting. Includes THE BUTTON®, C2®, WAVERSAVER®, instruction manual & EDS on 3½" floppy disk.
HI 200DNWM-DR with Din rail mounting kit
HI 200DNWM-SK with module stacking kit. Includes hardware
for stacking a second HI 200DNWM
HI 200DNWM-SK1 Two complete weigh modules pre-stacked for standoff mounting. Includes THE BUTTON, C2, WAVERSAVER, instruction manual & EDS on 3½" floppy disk.
HI 200DNWM-SK1-DR with Din rail mounting kit
HI 200DNWM-SS DeviceNet Weigh Module with Summing Card in a stainless steel NEMA 4x enclosure with conduit hubs. Includes THE BUTTON, C2,
WAVERSAVER, instruction manual & EDS on 3½" floppy disk.
HI 200DNWM-PS DeviceNet Weigh Module with Summing Card
in a painted steel NEMA 4 enclosure with conduit hubs. Includes THE BUTTON, C2, WAVERSAVER, instruction manual & EDS on 3½" floppy disk.