Advantage High Capacity Low Profile Rocker LPRA

The Hardy HI LPRA Advantage® Series, Low Profile, rocker load point systems are designed for use on high capacity vessels.

Advantage High Capacity Low Profile Rocker LPRA

The Hardy HI LPRA Advantage® Series, Low Profile, rocker load point systems are designed for use on high capacity vessels.

Each load point consists of mounting hardware and a stainless steel mV/V, mV/V/ohm matched,short rocker type load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, on-board electronic certs, a ¼ NPT conduit adapter and thirty feet of cable. Each low profile rocker load point system provides built-in checking, lift-off protection and is specifically designed to eliminate the effects of unwanted forces to provide the highest possible accuracy. A grounding strap, fixed color code wiring label and installation manual are provided with each load point.

The mounting hardware is available in either stainless or zinc plated steel. The sensors have an IP rating of IP68/IP69K and are NTEP Class III.

The HI LPRA short rocker load point assembly is available in the following standard capacities: 33K lbs and 50K lbs. They, along with the HI LPRC03, are replacements for the HI LPD series load point line.

Specifications

Rated Output
(ES) 2±0.002mV/V
Non-Linearity
<±0.012 % R.O.
Hysteresis
<±0.025 % R.O.
Zero Balance
<±1.0 % R.O.
Creep @ 5 Min.
<±0.010 % R.O.
Temp Effect Output
<±0.0014 % R.O./C
Temp Effect Sensitivity
<±0.0005 % R.O./C
Input Resistance
1150 ± 50 ohm
Output Resistance
1000 ± 10 ohm
Insulation Resistance
>5000 Mohm
Excitation
5 - 15 vdc
Safe Load Limit
200 % Emax
Ultimate Load
300 % Emax
Safe Side Load
16.86 Klbs
Max Lift Off
16.86 Klbs
Warranty
Two years

Specifications subject to change without notice

 

Options

Load Point can be ordered with zinc plated Hardware (-45C) as shown

Optional Stainless Hardware (-43C)

Shipping Weight approx 35 lbs. for Load Point, 4.5 lbs. for Sensors.