ANY-WEIGH® Bench Scales

WAVERSAVER® Hardy's WAVERSAVER core technology eliminates the effects that surrounding vibration has on the scale weight signal, providing only true data for fast, accurate weight reading. Read more about WAVERSAVER® THE BUTTON Hardy's THE BUTTON lets you calibrate your weighing system in seconds by just pushing a button. Read more about THE BUTTON INTEGRATED TECHNICIAN® Hardy's Integrated Technician (IT) core feature helps you troubleshoot your weighing system and diagnose problems from the front of the instrument or via the PLC.  Read more about INTEGRATED TECHNICIAN® C2® Electronic Calibration Hardy's C2® core feature provides quick and easy electronic calibration of a weighing system without the need for heavy test weights. Read more about C2® Electronic Calibration

Value and flexibility in size and capacity

Hardy's ANY-WEIGH® Bench Scales can be used for general check weighing or filling applications, placed under a feeder for loss-in-weight rate control, or for general Quality Assurance (QA) laboratory work. ANY-WEIGH Bench Scales are resistant to moisture with a stainless steel top, powder coated steel base, and conformal-coated internal circuitry. However, they are not intended for immersion in liquids or severe wash-down applications.

SIZES/CAPACITIES

They are available in two standard sizes with multiple capacities. They range in height from 1.54in (39.1mm) to 2.05in (52.1mm).

Scale size: 12 inch by 12 inch (298mm by 298mm)
Scale capacities: 33, 66, 130 lbs (15, 30, 60 kg)

Scale size: 24 inch by 24 inch (600mm x 600mm)
Scale capacities: 130, 330, 660, 1,300 lbs (60, 150, 300, 590 kg)

TYPES

All sizes and capacities are available in four different types:

1) Universal Scale HI SBU Series
This is a standard strain gauge based bench scale for use with any strain gauge based weighing instrument or controller. It comes with a 15-foot 6-conductor cable for interfacing with an instrument. It has C2® electronic calibration capabilities built-in. This series replaces the HIPS Series of platform scales.

Model numbers are:

• HI 1212SBU-33 (66 or130)
• HI 2424SBU-130 (330, 660 OR 1,300)

2) DeviceNet Scale HI SBD Series
This version come with a built-in DeviceNet interface so you can use this scale to provide a weight output to any point on the DeviceNet Network. It provides 20-bit resolution with a selectable conversion rate of 10 or 55 updates per second. It comes from the factory pre-calibrated and pre-wired with a DeviceNet micro C connector for easy installation to a network. Just set in an address (dip switch on bottom), connect to your network, configure and it is up and running. Power is provided from the DeviceNet network. The ANY-WEIGH outputs Gross, Net and Tare weight values and accepts inputs for zero and tare. Need to recalibrate? One push of "THE BUTTON®" automatically recalibrates the scale. The HI SBD series also supports C2® electronic calibration over its DeviceNet interface. Vibration on the scale is no problem with its built-in WAVERSAVER® technology. The HI SDB Series is a referenced Global product in Rockwell's (Allen-Bradley) Encompass partnering program.

Model numbers are:

• HI 1212SBD-33 (66 or130)
• HI 2424SBD-130 (330, 660 OR 1,300)

3) Analog Scale HI SBA Series
This version comes with a built-in strain gauge transmitter providing a 4-20mA output proportional to the weight reading directly to a control system. The HI SBA comes with a 15-foot two wire shielded cable which carries DC power to the scale and the weight signal from it. The scale comes pre-wired and pre-calibrated from the factory but provides potentiometers for coarse and fine zero adjustment as well as span. It does not have C2 or WAVERSAVER capabilities.

• HI 1212SBA-33 (66 or130)
• HI 2424SBA-130 (330, 660 OR 1,300)

4) Analog Hazardous Scale HI SBAFM Series
This version comes with a built-in strain gauge transmitter providing a 4-20mA output proportional to the weight reading directly to a control system. These scales are Intrinsically safe* for use in Class I, II, Div 1, Groups A, B, C, D, E, F and G, T4. The HI SBAFM comes with a 15-foot two wire shielded cable which carries DC power to the scale and the weight signal from it. The scale comes pre-wired and pre-calibrated from the factory but provides potentiometers for coarse and fine zero adjustment as well as span. It does not have C2 or WAVERSAVER capabilities.

*Intrinsic barriers are required

Model numbers are:

• HI 1212SBAFM-33 (66 or130)
• HI 2424SBAFM-130 (330, 660 OR 1,300)